Call Us: 1.800.798.4598

Puerto Vallata, Mexico View Location

How To Use hGH

HOW TO USE - hGH

First be advised that the only true form of hGH comes in the form of a lyophilized powder, any other form that you see advertised or offered is NOT true hGH. The only way to administer true HGH is by subcutaneous or intra-muscular injection.

hGH is fragile and needs to be protected from both the light and the heat. hGH should be stored in a cool fridge 36 - 46 degrees Fahrenheit or 2-6 degrees Centigrade before and after its reconstitution; UNLESS you are using the products JTPN or SAIZEN. These two don't require constant refridgeration; and almost all brands of somatropin (hGh) need to be stored, shipped and remain in a refrigerated location. There two brands (JTPN/JINTROPIN & SAIZEN) can survive normal room temperature during storage and shipping; however only before the mixture or the reconstitution. ALL hGH brands need to be refridgerated after being reconstituted (mixing the lyophilized poweder and the bacteriostatic water).

HGH Injection Instructions

HGH Injection Instructions
What is needed for proper administration of Somatropin HGH (Human Growth Hormone):

image

1 Saizen HGH Box

image

Inspect Saizen Box Contents

image

1 bottle of bacteriostatic water; 1 bottle of JTPN (somatropin)  

image

1 mixing syringe

image

HGH administering syringes

image

1 sharps container for disposal


The "somatropin hGH Injection administration process":

NOTE: Administration of Growth Hormone is the example in this illustration, and the HGH injection process can be applied to several types of Human Growth Hormone for injection. Always follow package inserts included with medication prior to application.


image

Step 1:
Remove cap/break top off of the bacteriostatic water vial and extract 3.0 cc into the mixing syringe at moderate pace
image

Step 2:
Make sure that the amount of 3.0 cc has been extracted out of the vial containing the bacteriostatic water.
image

Step 3:
Remove the colored plastic cap from the small Somatropin HGH bottle (Vial, Ampoule) as it will no- longer be needed.
image

Step 4:
Place the mixing syringe into the glass Somatropin HGH bottle and insert slowly (a little bit faster than a drop-per-drop pace will do) and insert the bacteriostatic water into vial.
image

Step 5:
After 3.0 cc of bacteriostatic water has been inserted slowly turn the bottle until the liquid has mixed with the powder. DO NOT SHAKE IT: SHAKING WILL RUIN PROTEIN MIXTURE.
image

Step 6:
Mixing is complete when the liquid has become clear and there are no signs of powder left in the Somatropin HGH bottle or vial. Make sure he bottle or mixture is not cloudy.
image

Step 7:

When ready for your first dosage, get an administering syringe ready.
image

Step 8:
Remove the plastic caps from the administering syringes and use small insulin syringe.
image

Step 9:
Insert the administering syringe into the bacteriostatic water bottle (now the mixed growth hormone)
image

Step 10:
Extract the liquid at a moderate pace until 40.0 units is read on the syringe.
image

Step 11:
Make sure the syringe reads 40.0 units. (this amount is 2 IU of HGH)
image

Step 12:
Inject Somatropin into the belly area or inner thigh. The injection is subcutaneous.
image

Step 13:
Dispose of the mixing and administering syringes in a secure safe disposable container
image

Step 14:
Take the bacteriostatic water (now mixed with growth hormone) and place in the refrigerator
image

Step 15:
Make sure to place it in the refrigerator and NOT THE FREEZER - DO NOT FREEZE hGH ever.
image

Step 16:
Place all hGH vials in a safe location in the cooler or refridgerator where it will not fall on the floor and break
image

Final Step 17:
Ensure refrigerator is at a normal temperature. Keeping the bottle in refrigerator will allow reconstituted hGH solution to last for 14 days.
It is highly recommended you take the administrated dosages, right before you go to sleep at night, this will enhance the overall efficacy.

 

RECONSTITUTING AND MEASURING hGH

Your vial of hGH (either JTPN, SAIZEN, SEROSTIM, CRYOTROPIN, GENTROPIN, JINOTROPIN, NORDITROPIN etc..) is in the form of a lyophilized powder and comes with a small bottle of bacterostatic water for mixing. The amount of the powder should be indicated on the vial, it will stated Units (IU's) or Milligrams (mg). If in milligrams the conversion is precisely 1mg=2.7IU but they state in general taht 1mg = 3IU's so 4IU's equal 1.33mg. As a phyhsician I use precise measurements but most people use the 1mg = 3IU's since that is the standard commonly referenced by mfgs.

We will add the bacteriostatic water (or sterile water) to the lyophilized powder  {some patients and physicians i've spoken with during my experience of 20years on this product use liquid vitamin B12 to reconstitute} and thus prepare for injection.

What you choose to reconstitute hGH with depends on how rapidly we use the GH. Bacteriostatic water is basically sterile water with 0.9% Benzyl Alcohol added, and this Alcohol keeps anything from growing in the water, thus making it safe for injection for the longest amount of time, about three to three 1/2 weeks. If the amount of GH in our vial is enough to last for a few weeks at our desired daily dosage then bacteriostatic water is the way to go and diluent of choice. Many users {for bodybuilding use about 2-5 IU's a day} and remember most vials will be used up long before any bacteria begins to grow in the reconstituted hGH. So it's really a personal preference which diluent you use.

RECONSTITUTING
1.) Take some alcohol and swab the stopper {top of the vial} of your hGH vial and the dilutent water.

2.) Take a 3cc syringe with a 23 or 25 gauge needle (1" or 1.5") and draw up the amount of your preferred dilutent. The amount isn't critical, other than making sure you know exactly how much you have used. The rule of thumb is choose an amount that will make measuring the final product easy

  • Example: 1ml (cc) per 10IU vial of hGH means each 10 mark on U100 syringe equals 1 IU of HGH
  • 2ml (cc) added to a 10 IU vial of HGH means each 20 mark on a U100 syringe equal 1 IU of HGH
  • 3ml (cc) added to a 10 IU vial of HGH means the 30 mark on U100 syringe would equal 1 IU of HGH

3.) Then you take the syringe {alread having the dilutent} and push it into the vial contianing the lyophilized powder, you may want to angle it so that the needle touches the side of the vial, and avoiding injecting the dilutent directly onto the lyophilized powder, you want to make it run slowly down the side of the vial (don't force it all at once or don't rush it in).

4.) After all of the dilutent has been added to the vial of hGH, gentlly swirl (but do NOT agitate or violently shake the vial) until the lyophilized powder has dissolved and you are left with a clear liquid. The hGH is now ready for use. Store your reconstituted hGH in the refrigerator and if you used bacteriostatic water to reconstitute, it will be good for about three weeks. If you used sterile water, then it will only be good for about 4 -5 days.

MEASURING
After you have reconstituted the hGH, you need to know how to measaure the amount for injection right? You need to use a U-100 Insulin Syringe to draw and inject the hGH. Here's how: since you know the amount of IU's in your HGH vial and you know how much water you have diluted it with, just divide as listed below: You need to know the following -

  • 1ml = 1cc = 100 IU's

So take the number of IU's of the hGH off of the label of the lyophilized powder (most common is 4 or 10iu's) divide that into the amount of dilutent we used.
Example-
We used 1cc or a ml of water; we also have a 10 IU vial of hGH.
We know from above that 1cc = 100 IU's, so we have 100 IU's of water.
We now divide the 100 IU's (the amount of our water) by 10 IU's (the amount of hGH)

  • 100 IU / 10 IU = 10

This 10 will perfectly correspond with the markings on a U100 insulin syringe. In our example, every 10 mark on the syringe will equal 1 IU of hGH. You want to draw 2 IU's of GH? ....draw out to the 20 mark on the syringe.

SUMMARY:

1.) How much actual hGH you are dealing with (read the vial 4IU or 10IU?)
2.) How much water (dilutent) are you using to add to the hGH.
3.) Divide the amount of water in units by the amount of hGH in units.
4.) This result will equal the measurement on your U100 Insulin syringe per unit of GH.
5.) multiply the number you get {same as in step 4} by how many units you want to inject. This is the number to draw to on your syringe.

Now that we know what HGH is and how to reconstitute and measure it, lets look at some strategies for using it to our best advantage

1.800.798.4598
E-Mail Clinic


...For A FREE DOCTOR Consultation,
fill the contact form for a Doctor Callback:

Contact FORM